Rulon LR Round Rod, Maroon, 3/4" OD, 24" Length

Rulon LR Round Rod, Maroon, 3/4" OD, 24" Length Reviews

Other Picture

Rulon LR Round Rod, Maroon, 3/4" OD, 24" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 28, 2011 15:13:03

Acrylic Round Rod, Clear, 3/4" OD, 12" Length

Acrylic Round Rod, Clear, 3/4" OD, 12" Length Reviews

Other Picture

Acrylic Round Rod, Clear, 3/4" OD, 12" Length Feature

• Ammonia and Detergent Resistant
• Cast Acrylic rivals glass in transparency (92 percent light transmission) and exhibits outstanding weatherability.
• Haze Free Longevity
• Shatter and Impact Resistant
• Lightweight

Cast Acrylic rivals glass in transparency (92 percent light transmission) and exhibits outstanding weatherability. The casting process produces profiles with superior optical properties compared to molded or extruded products. Physical properties are also superior with less process induced stress (resistance to cracking/crazing). Cast Acrylic is approximately 1/2 the weight of glass and fabricates similar to wood. Post machining polishing can produce crystal clear components.Applications include displays, models, electrical/electronic parts, special lighting applications and industrial fixturing.

Visit Store Now !!

Detail Products

• Polycarbonate Round Rod, Clear, 1/2" OD, 36" Length
• Acetal Round Rod, Black, 1" OD, 24" Length
• 90294 Acrylic Rod 1/4" (10)
• Polycarbonate Sheet, ASTM D 3935, Clear, 1/4" Thick, 12" Width, 24" Length
• 90293 Acrylic Rod 3/16" (20)

Detail Reviews

Sep 27, 2011 18:31:16

Turcite X ETFE Round Rod, Red, 3/4" OD, 24" Length

Turcite X ETFE Round Rod, Red, 3/4" OD, 24" Length Reviews

Other Picture

Turcite X ETFE Round Rod, Red, 3/4" OD, 24" Length Feature

• Load Bearing
• Minimally Hygroscopic
• Maximum Continuous Temperature 180 F
• Low Thermal Expansion
• Easily Fabricated

Turcite X is a fluoropolymer based material with proprietary additives for enhanced performance. It excels in low load and high speed applications, and can be easily machined. It has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material. Its maximum continuous service temperature is also 180 F (80 C). Turcite X has lower friction properties than Turcite A. Typical applications include bearings, bushings and slides. It is lubricious, similar to PTFE but has more back bone.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 26, 2011 21:07:04

Nylatron GS Round Rod, Black, 5/8" OD, 36" Length

Nylatron GS Round Rod, Black, 5/8" OD, 36" Length Reviews

Other Picture

Nylatron GS Round Rod, Black, 5/8" OD, 36" Length Feature

• Excellent Bushing and Bearing Material
• 1/8 the Weight of Bronze
• Corrosion Resistant
• Easily Maintained
• Easily Fabricated

Nylatron GS Nylon 6/6 is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. It exhibits excellent wear and abrasion resistance and is 1/8 the weight of bronze making it an excellent replacement for metal bushings. It is easier to fabricate and maintain than metal.

Visit Store Now !!

Detail Products

• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 48" Length
• Acetal Round Rod, Black, 1" OD, 24" Length
• Nylon Molybdenum Round Rod, 3/16" OD, 24" Length
• 6 Inch LCD Digital Caliper with Extra Battery and Case
• Aluminum 6061-T6511 Round Rod, 1" OD, 72" Length

Detail Reviews

Sep 25, 2011 23:53:03

PTFE Round Rod, White, 1-1/2" OD, 36" Length

PTFE Round Rod, White, 1-1/2" OD, 36" Length Reviews

Other Picture

PTFE Round Rod, White, 1-1/2" OD, 36" Length Feature

• Rod Form
• Max Temp 400 F
• Very Low Coefficient of Friction
• Extremely Low Dielectric Constant
• UV and Ozone Resistant

PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C).

Visit Store Now !!

Detail Products

• Acetal Round Rod, Black, 3/8" OD, 24" Length
• PTFE Sheet, White, 0.015" Thick, 12" Width, 12" Length
• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length
• PEEK Round Rod, Tan, 1/2" OD, 12" Length
• 20pc MICRO-DRILL BITS INDEX 61-80 w/ Plastic Case

Detail Reviews

Sep 24, 2011 06:08:04

Turcite A ETFE Round Rod, Turquoise, 5/8" OD, 60" Length

Turcite A ETFE Round Rod, Turquoise, 5/8" OD, 60" Length Reviews

Other Picture

Turcite A ETFE Round Rod, Turquoise, 5/8" OD, 60" Length Feature

• Load Bearing
• Minimally Hygroscopic
• Maximum Continuous Temperature 180 F
• Low Thermal Expansion
• Easily Fabricated

Turcite X is a fluoropolymer based material with proprietary additives for enhanced performance. It excels in low load and high speed applications, and can be easily machined. It has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material. Its maximum continuous service temperature is also 180 F (80 C). Turcite X has lower friction properties than Turcite A. Typical applications include bearings, bushings and slides. It is lubricious, similar to PTFE but has more back bone.

Visit Store Now !!

Detail Products

• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.017" Diameter, 72" Length (Pack of 1)
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 60" Length
• Noryl EN-265 Round Rod, Black, 1/2" OD, 60" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 36" Length

Detail Reviews

Sep 23, 2011 02:11:08

Torlon 4203 Round Rod, Brown, 1" OD, 36" Length

Torlon 4203 Round Rod, Brown, 1" OD, 36" Length Reviews

Other Picture

Torlon 4203 Round Rod, Brown, 1" OD, 36" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 22, 2011 02:14:06

PEEK 1000 Round Rod, Tan, 1/2" OD, 24" Length

PEEK 1000 Round Rod, Tan, 1/2" OD, 24" Length Reviews

Other Picture

PEEK 1000 Round Rod, Tan, 1/2" OD, 24" Length Feature

• Exceptional Heat Resistance
• Bio Compatible
• Excellent Abrasion Resistance
• Excellent Chemical resistance
• Melt Processable

PEEK is a semicrystalline thermoplastic with extraordinary mechanical properties. The Young's modulus is 3.6 GPa and its tensile strength 90 MPa. PEEK exhibits two glass transition temperatures at around 140 C (284 F) and around 275 C (527 F), depending on cure cycle and precise formulation. PEEK melts at around 350 C (662 F) and is highly resistant to thermal degradation. The material is also resistant to both organic and aqueous environments, and is used in bearings, piston parts, pumps, compressor plate valves, and cable insulation applications. It is one of the few plastics compatible with ultra-high vacuum applications. PEEK is considered an advanced biomaterial used in medical implants. It is used in the areospace industry primarily for its wide temperature range.

Visit Store Now !!

Detail Products

• PEEK Round Rod, Tan, 1/2" OD, 12" Length

Detail Reviews

Sep 20, 2011 11:53:04

Turcite A ETFE Round Rod, Turquoise, 3/4" OD, 36" Length

Turcite A ETFE Round Rod, Turquoise, 3/4" OD, 36" Length Reviews

Other Picture

Turcite A ETFE Round Rod, Turquoise, 3/4" OD, 36" Length Feature

• Load Bearing
• Minimally Hygroscopic
• Maximum Continuous Temperature 180 F
• Low Thermal Expansion
• Easily Fabricated

Turcite X is a fluoropolymer based material with proprietary additives for enhanced performance. It excels in low load and high speed applications, and can be easily machined. It has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material. Its maximum continuous service temperature is also 180 F (80 C). Turcite X has lower friction properties than Turcite A. Typical applications include bearings, bushings and slides. It is lubricious, similar to PTFE but has more back bone.

Visit Store Now !!

Detail Products

• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.017" Diameter, 72" Length (Pack of 1)
• Stainless Steel 304 Hypodermic Round Tubing, 18 Gauge, 0.05" OD, 0.033" ID, 0.0085" Wall, 60" Length
• Noryl EN-265 Round Rod, Black, 1/2" OD, 60" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 36" Length

Detail Reviews

Sep 19, 2011 03:46:03

Teflon FEP Round Rod, White, 1/4" OD, 48" Length

Teflon FEP Round Rod, White, 1/4" OD, 48" Length Reviews

Other Picture

Teflon FEP Round Rod, White, 1/4" OD, 48" Length Feature

• Temperature Range -348 to 400 F
• Extreme Chemical Resistance
• Lowest critical surface energy of all plastics
• Lowest Refractive Index of All Plastics
• Extremely low dielectric constant and dissipation factor

Teflon FEP Rod has excellent chemical, thermal, and electrical stability. It retains a high percentage of its useful properties from cryogenic to elevated temperatures -348 F to 400 F. It has the lowest critical surface energy of all plastics, which makes it an excellent water and oil repellent for non-stick and mold release. Teflon FEP has an extremely low dielectric constant and dissipation factor. Excellent resistance to UV, Ozone, and has the lowest refractive index of all plastics. Typical applications include electronic bobbins, piping material for high temperature use, spring actuated seals, gaskets, packing and valve seats.

Visit Store Now !!

Detail Products

• PTFE Round Rod, White, 3/16" OD, 36" Length
• Teflon TFE Sheet, White, 1/8" Thick, 12" Width, 12" Length

Detail Reviews

Sep 17, 2011 02:48:04

Ultem 2300 Round Rod, Beige, 3/4" OD, 24" Length

Ultem 2300 Round Rod, Beige, 3/4" OD, 24" Length Reviews

Other Picture

Ultem 2300 Round Rod, Beige, 3/4" OD, 24" Length Feature

• PEI will withstand continuous temperature of 390 F under load.
• Is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors
• PEI has found use in the Medical Device Market because of its heat and radiation resistance
• It is prone to stress cracking in chlorinated solvents.
• It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents.

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 07:43:04

Torlon 4301 Round Rod, Black, 3/8" OD, 48" Length

Torlon 4301 Round Rod, Black, 3/8" OD, 48" Length Reviews

Other Picture

Torlon 4301 Round Rod, Black, 3/8" OD, 48" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 15, 2011 03:59:04

Kynar 740 PVDF Round Rod, USP-CLASS-VI, White, 1/2" OD, 36" Length

Kynar 740 PVDF Round Rod, USP-CLASS-VI, White, 1/2" OD, 36" Length Reviews

Other Picture

Kynar 740 PVDF Round Rod, USP-CLASS-VI, White, 1/2" OD, 36" Length Feature

• USP Class VI
• Continuous Operating Temperature 280 F
• UL 2360 Class II
• Chemically Inert
• Excellent Weatherability and UV Resistance

PVDF (polyvinylidene fluoride) is a flouroplastic in the fluorohydrocarbon family. The fully fluorinated PTFE is more chemically inert and thermally stable than the partially fluorinated PVDF; however PVDF has superior mechanical properties. Tensile strength is 7000 psi and the continuous operating temperature is 280F. Kynar 740 offers excellent chemical and corrosion resistance at both ambient and elevated temperatures. Rigidity and creep resistance are also superior to PTFE. Hardness is 77 Shore D. Color is Natural Beige. Easily machined, drilled and sawed. Excellent weather ability and UV resistant. Meets the following criteria: USP Class VI , UL 2360 Class II , Flammability Rating-UL 94 (V-0) ,FM 4910 Listed.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 14, 2011 06:21:04