Acetal Round Rod, Black, 1/2" OD, 36" Length

Acetal Round Rod, Black, 1/2" OD, 36" Length Reviews

Other Picture

Acetal Round Rod, Black, 1/2" OD, 36" Length Feature

• Excellent machinability
• Excellent Dimensional Stability
• Tough and Impact Resistant
• Low Coefficient of Friction
• Moderate Chemical Resistance

Commonly referred to as Delrin, this Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.Note: Delrin may cause allergic reaction. Use of gloves and a dust mask is recommended when handling or machining.

Visit Store Now !!

Detail Products

• Acetal Round Rod, White, 1-1/2" OD, 12" Length
• PTFE Round Rod, White, 3/8" OD, 24" Length
• Acetal Sheet, Black, 1/2" Thick, 6" Width, 12" Length
• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length
• Nylon Molybdenum Round Rod, 3/16" OD, 24" Length

Detail Reviews

Sep 01, 2011 07:17:03

UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 60" Length

UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 60" Length Reviews

Other Picture

UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 60" Length Feature

• Low Coefficient of Friction
• Very High Impact Strength
• Excellent Abrasion Resistance
• Self Lubricating
• Highly Resistant to Corrosives

Ultra high molecular weight polyethylene (UHMWPE), also known as high-modulus polyethylene (HMPE) or high-performance polyethylene (HPPE), is a thermoplastic. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. It is highly resistant to corrosive chemicals, with exception of oxidizing acids. It has extremely low moisture absorption, has a very low coefficient of friction, is self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of PTFE, sometimes none as the poor mansTeflon, but UHMWPE has better abrasion resistance than Teflon. It is odorless, tasteless, and nontoxic

Visit Store Now !!

Detail Products

• UHMW (Ultra High Molecular Weight) Polyethlylene Sheet, White, 1" Thick, 12" Width, 12" Length
• Nylatron GS Round Rod, Black, 7/8" OD, 36" Length
• HDPE (High Density Polyethylene) Round Rod, White, 1/4" OD, 60" Length
• Acetal Round Rod, Black, 3/16" OD, 36" Length
• HDPE (High Density Polyethylene) Sheet, White, 1" Thick, 12" Width, 12" Length

Detail Reviews

Aug 31, 2011 08:32:03

LDPE (Low Density Polyethylene) Round Rod, White, 5/8" OD, 24" Length

LDPE (Low Density Polyethylene) Round Rod, White, 5/8" OD, 24" Length Reviews

Other Picture

LDPE (Low Density Polyethylene) Round Rod, White, 5/8" OD, 24" Length Feature

• High Impact Strength
• Low working Temperature
• Excellent Electrical Insulation
• Low Moisture Absorption

Low Density Polyethylene (LDPE) is in the family of polyolefins. LDPE is a high impact strength extruded material that is corrosion resistant and exhibits low moisture permeability. It has a low working temperature, soft surface and low tensile strength. Some of the benefits of the material include its excellent electrical insulation properties, design versatility, low cost, low temperature formability, high coefficent of friction and it is virtually maintenace free. It is widely used in the chemical, petroleum, textile, food and paper processing mills and in marine environments.

Visit Store Now !!

Detail Products

• Polypropylene Round Rod, Natural, 1/2" OD, 36" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 36" Length
• PVC Type 1 Round Rod, Gray, 7/8" OD, 24" Length
• HDPE (High Density Polyethylene) Round Rod, White, 1/4" OD, 60" Length
• LDPE (Low Density Polyethylene) Sheet, White, 0.375" Thick, 12" Width, 24" Length

Detail Reviews

Aug 30, 2011 04:25:04

HDPE (High Density Polyethylene) Round Rod, White, 7/8" OD, 48" Length

HDPE (High Density Polyethylene) Round Rod, White, 7/8" OD, 48" Length Reviews

Other Picture

HDPE (High Density Polyethylene) Round Rod, White, 7/8" OD, 48" Length Feature

• Abrasion Resistant
• Low coefficient of Friction
• Good Energy Absorption
• Resists Stress Cracking
• Moderate Temperature Rating

High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin's.

Visit Store Now !!

Detail Products

• HDPE (High Density Polyethylene) Sheet, White, 1" Thick, 12" Width, 12" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 36" Length
• Polypropylene Round Rod, Natural, 1/2" OD, 36" Length
• Nylon Round Rod, White, 1" OD, 12" Length
• Polycarbonate Round Rod, Clear, 1/4" OD, 36" Length

Detail Reviews

Aug 29, 2011 09:12:10

Rulon LR Round Rod, Maroon, 7/8" OD, 36" Length

Rulon LR Round Rod, Maroon, 7/8" OD, 36" Length Reviews

Other Picture

Rulon LR Round Rod, Maroon, 7/8" OD, 36" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 02:48:06

Polycarbonate Round Rod, Clear, 1" OD, 6" Length

Polycarbonate Round Rod, Clear, 1" OD, 6" Length Reviews

Other Picture

Polycarbonate Round Rod, Clear, 1" OD, 6" Length Feature

• High Impact Resistance
• Temperature Range of -60 to 270 F
• High Rigidity
• Ductility of Softer Lower Modulus Plastics
• Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

Visit Store Now !!

Detail Products

• Acrylic Round Rod, Clear, 1" OD, 24" Length
• Polycarbonate Sheet, ASTM D 3935, Clear, 1/4" Thick, 12" Width, 24" Length
• Polycarbonate Tubing, 3/4" ID x 1" OD x 1/8" Wall, Clear Color 36" L
• HDPE (High Density Polyethylene) Round Rod, White, 5/8" OD, 60" Length
• Acetal Round Rod, Black, 1/8" OD, 36" Length

Detail Reviews

Aug 27, 2011 01:39:08

Ultem 2300 Round Rod, Beige, 1" OD, 6" Length

Ultem 2300 Round Rod, Beige, 1" OD, 6" Length Reviews

Other Picture

Ultem 2300 Round Rod, Beige, 1" OD, 6" Length Feature

• PEI will withstand continuous temperature of 390 F under load.
• Is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors
• PEI has found use in the Medical Device Market because of its heat and radiation resistance
• It is prone to stress cracking in chlorinated solvents.
• It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents.

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 26, 2011 01:27:03

Fluorosint 500 PTFE Round Rod, White, 1-1/4" OD, 36" Length

Fluorosint 500 PTFE Round Rod, White, 1-1/4" OD, 36" Length Reviews

Other Picture

Fluorosint 500 PTFE Round Rod, White, 1-1/4" OD, 36" Length Feature

• Low Deformation Under Load
• Low Coefficient of Friction
• Excellent Dimensional Stability
• FDA and USDA Compliant
• Chemically Inert

Fluorosint 500s unique properties are the result of a proprietary process in which synthetically manufactured mica is chemically linked to PTFE. This bonding results in properties not normally attainable in reinforced PTFE. It has a continuous use temperature to 500 F. When compared to PTFE it has a higher load carrying capability, and lower coefficient of thermal expansion. Fluorosint 500 is a structural/seal grade filled with enough mica to produce a thermal expansion 15percent less than unfilled PTFE.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 23, 2011 19:27:07

Nylatron GS Round Rod, Black, 1" OD, 24" Length

Nylatron GS Round Rod, Black, 1" OD, 24" Length Reviews

Other Picture

Nylatron GS Round Rod, Black, 1" OD, 24" Length Feature

• Excellent Bushing and Bearing Material
• 1/8 the Weight of Bronze
• Corrosion Resistant
• Easily Maintained
• Easily Fabricated

Nylatron GS Nylon 6/6 is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. It exhibits excellent wear and abrasion resistance and is 1/8 the weight of bronze making it an excellent replacement for metal bushings. It is easier to fabricate and maintain than metal.

Visit Store Now !!

Detail Products

• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 1" OD, 36" Length
• Acetal Round Rod, Black, 1/4" OD, 24" Length
• Nylon Molybdenum Round Rod, 5/8" OD, 36" Length
• Aluminum 6061-T6511 Round Rod, 0.75" OD, 72" Length
• Brass 360-H02 Round Rod, ASTM B16, 1/8" OD, 72" Length

Detail Reviews

Aug 21, 2011 11:27:04

Rulon AR Round Rod, Maroon, 1" OD, 48" Length

Rulon AR Round Rod, Maroon, 1" OD, 48" Length Reviews

Other Picture

Rulon AR Round Rod, Maroon, 1" OD, 48" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon AR is the original reinforced PTFE Fluoropolymer (Similar to Teflon) for load bearing applications. It has the best combination of flexibility and load bearing capabilities and is recommended for seal applications. Rulon AR is a good electrical insulator and has excellent chemical resistance.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 20, 2011 04:43:08

Noryl EN-265 Round Rod, Black, 1/4" OD, 36" Length

Noryl EN-265 Round Rod, Black, 1/4" OD, 36" Length Reviews

Other Picture

Noryl EN-265 Round Rod, Black, 1/4" OD, 36" Length Feature

• Temperature range -40 to 265 F
• Strong and Rigid
• Hot Water Resistant
• Bondable
• Autoclavable

Noryl EN-265 PPO (Polyphenylene Oxide) is a strong, rigid, tough, hot water resistant amorphous thermoplastic. It has very good electrical insulation properties, is lightweight, and easily bonded, however care must be taken because it is prone to stress cracking. Produced by a specially developed resin for repeated sterilization in the autoclave, Material offers the autoclaving performance of PPSU but is easier to machine with less tool wear. It is widely used in the automotive, medical, and food service sector. Temperature range -40 to 265 F

Visit Store Now !!

Detail Products

• Acetal Round Rod, Black, 1/2" OD, 36" Length
• Ertalyte PET Round Rod, White, 5/8" OD, 60" Length
• Ultem 1000 Round Rod, Beige, 1/2" OD, 12" Length
• Nylon Molybdenum Round Rod, 5/8" OD, 36" Length
• Nylatron GS Round Rod, Black, 7/8" OD, 60" Length

Detail Reviews

Aug 19, 2011 07:47:03

Torlon 4203 Round Rod, Brown, 3/8" OD, 12" Length

Torlon 4203 Round Rod, Brown, 3/8" OD, 12" Length Reviews

Other Picture

Torlon 4203 Round Rod, Brown, 3/8" OD, 12" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 17, 2011 13:35:04

Rulon LR Round Rod, Maroon, 3/4" OD, 36" Length

Rulon LR Round Rod, Maroon, 3/4" OD, 36" Length Reviews

Other Picture

Rulon LR Round Rod, Maroon, 3/4" OD, 36" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 16, 2011 12:08:18