Ultem 1000 Round Rod, Beige, 3/8" OD, 60" Length

Ultem 1000 Round Rod, Beige, 3/8" OD, 60" Length Reviews

Other Picture

Ultem 1000 Round Rod, Beige, 3/8" OD, 60" Length Feature

• PEI will withstand continuous temperature of 390 F under load.
• Is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors
• PEI has found use in the Medical Device Market because of its heat and radiation resistance
• It is prone to stress cracking in chlorinated solvents.
• It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents.

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates.

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 17:28:22

PVC Type 1 Round Rod, Gray, 7/8" OD, 60" Length

PVC Type 1 Round Rod, Gray, 7/8" OD, 60" Length Reviews

Other Picture

PVC Type 1 Round Rod, Gray, 7/8" OD, 60" Length Feature

• Heat Resistant to 158 F
• Meets UlL 94
• Corrosion Resistant
• Light Structural Duty
• Easily Fabricated

PVC profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact. UL 94, NSF 61

Visit Store Now !!

Detail Products

• PVC Type 1 Sheet, Gray, 1/8" Thick, 12" Width, 24" Length
• Acetal Round Rod, Black, 1-1/2" OD, 12" Length
• Polypropylene Round Rod, Natural, 5/8" OD, 60" Length
• PVC Type 1 Sheet, White, 1/16" Thick, 12" Width, 24" Length
• HDPE (High Density Polyethylene) Sheet, White, 1" Thick, 12" Width, 24" Length

Detail Reviews

May 30, 2011 05:55:03

Nylatron GS Round Rod, Black, 3/4" OD, 60" Length

Nylatron GS Round Rod, Black, 3/4" OD, 60" Length Reviews

Other Picture

Nylatron GS Round Rod, Black, 3/4" OD, 60" Length Feature

• Excellent Bushing and Bearing Material
• 1/8 the Weight of Bronze
• Corrosion Resistant
• Easily Maintained
• Easily Fabricated

Nylatron GS Nylon 6/6 is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. It exhibits excellent wear and abrasion resistance and is 1/8 the weight of bronze making it an excellent replacement for metal bushings. It is easier to fabricate and maintain than metal.

Visit Store Now !!

Detail Products

• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 3/4" OD, 24" Length
• Acetal Round Rod, Black, 1-1/2" OD, 12" Length
• Nylon Molybdenum Round Rod, 1-1/2" OD, 12" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Sheet, White, 1/8" Thick, 12" Width, 12" Length
• Noryl EN-265 Round Rod, Black, 5/8" OD, 36" Length

Detail Reviews

May 28, 2011 15:40:03

Polypropylene Round Rod, Natural, 3/4" OD, 36" Length

Polypropylene Round Rod, Natural, 3/4" OD, 36" Length Reviews

Other Picture

Polypropylene Round Rod, Natural, 3/4" OD, 36" Length Feature

• Limited Cycles of Steam Sterilization
• Highly Resistant to Corrosive Materials
• Outstanding Chemical Resistance
• Continuous Temperature 180 - 200 F
• Low Cost

Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.

Visit Store Now !!

Detail Products

• HDPE (High Density Polyethylene) Round Rod, White, 1" OD, 12" Length
• LDPE (Low Density Polyethylene) Round Rod, White, 1/2" OD, 48" Length
• PVC Type 1 Round Rod, Gray, 3/8" OD, 60" Length
• Nylon Round Rod, White, 1" OD, 12" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 3/4" OD, 24" Length

Detail Reviews

May 27, 2011 16:16:05

Torlon 4203 Round Rod, Brown, 3/4" OD, 24" Length

Torlon 4203 Round Rod, Brown, 3/4" OD, 24" Length Reviews

Other Picture

Torlon 4203 Round Rod, Brown, 3/4" OD, 24" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 20:13:10

Polypropylene Round Rod, Natural White, 7/8" OD, 48" Length

Polypropylene Round Rod, Natural White, 7/8" OD, 48" Length Reviews

Other Picture

Polypropylene Round Rod, Natural White, 7/8" OD, 48" Length Feature

• Limited Cycles of Steam Sterilization
• Highly Resistant to Corrosive Materials
• Outstanding Chemical Resistance
• Continuous Temperature 180 - 200 F
• Low Cost

Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.

Visit Store Now !!

Detail Products

• HDPE (High Density Polyethylene) Round Rod, White, 1/4" OD, 60" Length
• LDPE (Low Density Polyethylene) Round Rod, White, 1/2" OD, 48" Length
• PVC Type 1 Round Rod, Gray, 1/4" OD, 60" Length
• Nylon Round Rod, White, 2" OD, 12" Length
• UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 3/4" OD, 24" Length

Detail Reviews

May 24, 2011 03:32:04

Polysulfone Round Rod, Translucent Amber, 1/4" OD, 6" Length

Polysulfone Round Rod, Translucent Amber, 1/4" OD, 6" Length Reviews

Other Picture

Polysulfone Round Rod, Translucent Amber, 1/4" OD, 6" Length Feature

• Continuous use temperature is 350 F
• Steam Sterilizable
• High Tensile Strength
• Clear Amber Transparent
• Self Extinguishing

Polysulfone PSO (UDEL Brand) is considered to be in the class of Superpolymers since it maintains its physical properties at temperatures above 400 F. Polysulfone is a clear amber amorphous thermoplastic that is stable, heat resistant and self extinguishing. It has a UL-rated continuous temperature of 320 F. It is very rigid with a flex modulus of 400,000 psi with a tensile strength of over 10,000 psi at yield. It has a high dielectric strength and low dissipation factor. PSO is highly resistant to mineral acid, alkali, and salt solutions. PSO is attacked by polar organic solvents and chlorinated and aromatic hydrocarbons. It is used in the Medical Device Industry and can be steam sterilized multiple times. Food grade microwave cookware and coffee carafes are a few of the many high temperature uses. FDA CFR-177.1655

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 08:23:03

Turcite X ETFE Round Rod, Red, 1" OD, 6" Length

Turcite X ETFE Round Rod, Red, 1" OD, 6" Length Reviews

Other Picture

Turcite X ETFE Round Rod, Red, 1" OD, 6" Length Feature

• Load Bearing
• Minimally Hygroscopic
• Maximum Continuous Temperature 180 F
• Low Thermal Expansion
• Easily Fabricated

Turcite X is a fluoropolymer based material with proprietary additives for enhanced performance. It excels in low load and high speed applications, and can be easily machined. It has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material. Its maximum continuous service temperature is also 180 F (80 C). Turcite X has lower friction properties than Turcite A. Typical applications include bearings, bushings and slides. It is lubricious, similar to PTFE but has more back bone.

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 15:37:03

PVC Type 1 Round Rod, Gray, 7/8" OD, 48" Length

PVC Type 1 Round Rod, Gray, 7/8" OD, 48" Length Reviews

Other Picture

PVC Type 1 Round Rod, Gray, 7/8" OD, 48" Length Feature

• Heat Resistant to 158 F
• Meets UlL 94
• Corrosion Resistant
• Light Structural Duty
• Easily Fabricated

PVC profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact. UL 94, NSF 61

Visit Store Now !!

Detail Products

• PVC Type 1 Sheet, Gray, 1/8" Thick, 12" Width, 24" Length
• Acetal Round Rod, Black, 3/8" OD, 36" Length
• Polypropylene Round Rod, Natural, 5/8" OD, 60" Length
• PVC Type 1 Sheet, White, 1/4" Thick, 12" Width, 12" Length
• HDPE (High Density Polyethylene) Sheet, White, 1" Thick, 12" Width, 24" Length

Detail Reviews

May 20, 2011 10:14:06

Torlon 4203 Round Rod, Brown, 1" OD, 24" Length

Torlon 4203 Round Rod, Brown, 1" OD, 24" Length Reviews

Other Picture

Torlon 4203 Round Rod, Brown, 1" OD, 24" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 11:18:04

Turcite X ETFE Round Rod, Turquoise, 1/4" OD, 48" Length

Turcite X ETFE Round Rod, Turquoise, 1/4" OD, 48" Length Reviews

Other Picture

Turcite X ETFE Round Rod, Turquoise, 1/4" OD, 48" Length Feature

• Load Bearing
• Minimally Hygroscopic
• Maximum Continuous Temperature 180 F
• Low Thermal Expansion
• Easily Fabricated

Turcite X is a fluoropolymer based material with proprietary additives for enhanced performance. It excels in low load and high speed applications, and can be easily machined. It has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material. Its maximum continuous service temperature is also 180 F (80 C). Turcite X has lower friction properties than Turcite A. Typical applications include bearings, bushings and slides. It is lubricious, similar to PTFE but has more back bone.

Visit Store Now !!

Detail Products

Detail Reviews

May 17, 2011 04:16:03

Rulon AR Round Rod, Maroon, 3/8" OD, 48" Length

Rulon AR Round Rod, Maroon, 3/8" OD, 48" Length Reviews

Other Picture

Rulon AR Round Rod, Maroon, 3/8" OD, 48" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon AR is the original reinforced PTFE Fluoropolymer (Similar to Teflon) for load bearing applications. It has the best combination of flexibility and load bearing capabilities and is recommended for seal applications. Rulon AR is a good electrical insulator and has excellent chemical resistance.

Visit Store Now !!

Detail Products

Detail Reviews

May 16, 2011 09:10:04

Acetal Round Rod, Black, 3" OD, 6" Length

Acetal Round Rod, Black, 3" OD, 6" Length Reviews

Other Picture

Acetal Round Rod, Black, 3" OD, 6" Length Feature

• Excellent machinability
• Excellent Dimensional Stability
• Tough and Impact Resistant
• Low Coefficient of Friction
• Moderate Chemical Resistance

Commonly referred to as Delrin, this Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.Note: Delrin may cause allergic reaction. Use of gloves and a dust mask is recommended when handling or machining.

Visit Store Now !!

Detail Products

• Acetal Round Rod, White, 1-1/2" OD, 24" Length
• Acetal Sheet, Black, 1/2" Thick, 6" Width, 12" Length
• Nylon Round Rod, White, 1-1/2" OD, 12" Length
• Brass 360-H02 Round Rod, ASTM B16, 1/4" OD, 72" Length
• PVC Type 1 Round Rod, Gray, 1/4" OD, 60" Length

Detail Reviews

May 15, 2011 13:59:08