Acetal Round Rod, White, 1/4" OD, 36" Length

Acetal Round Rod, White, 1/4" OD, 36" Length Reviews

Other Picture

Acetal Round Rod, White, 1/4" OD, 36" Length Feature

• Excellent machinability
• Excellent Dimensional Stability
• Tough and Impact Resistant
• Low Coefficient of Friction
• Moderate Chemical Resistance

Commonly referred to as Delrin, this Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.Note: Delrin may cause allergic reaction. Use of gloves and a dust mask is recommended when handling or machining. Color Natural Pale Cream.

Visit Store Now !!

Detail Products

• Acetal Round Rod, Black, 1/4" OD, 24" Length
• Nylon Round Rod, White, 1/16" OD, 72" Length
• Home Machinists Handbook
• Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET
• Stainless Steel 303 Round Rod, ASTM-A582, 1/4" OD, 72" Length

Detail Reviews

Feb 28, 2011 08:47:03

Polypropylene Round Rod, Natural White, 3/8" OD, 12" Length

Polypropylene Round Rod, Natural White, 3/8" OD, 12" Length Reviews

Other Picture

Polypropylene Round Rod, Natural White, 3/8" OD, 12" Length Feature

• Limited Cycles of Steam Sterilization
• Highly Resistant to Corrosive Materials
• Outstanding Chemical Resistance
• Continuous Temperature 180 - 200 F
• Low Cost

Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.

Visit Store Now !!

Detail Products

• PVC Type 1 Round Rod, Gray, 3/8" OD, 24" Length
• HDPE (High Density Polyethylene) Round Rod, White, 1" OD, 12" Length
• LDPE (Low Density Polyethylene) Round Rod, White, 1/4" OD, 24" Length
• Nylon Round Rod, White, 1/16" OD, 72" Length
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.275" OD, 0.125" Thick, 0.400" Shoulder Diameter, 0.25" Length (Pack of 100)

Detail Reviews

Feb 27, 2011 11:41:04

Rulon LR Round Rod, Maroon, 7/8" OD, 48" Length

Rulon LR Round Rod, Maroon, 7/8" OD, 48" Length Reviews

Other Picture

Rulon LR Round Rod, Maroon, 7/8" OD, 48" Length Feature

• Reinforced PTFE
• Load Bearing
• Excellent Chemical Resistance
• Excellent Electrical Insulation
• Best Load Bearing and Flexibility of Rulon Family

Rulon LR is a PTFE filled material modified to increase the materials mechanical properties. The resulting material exhibits slightly more load capacity than Rulon AR with a corresponding decrease in flexibility. Rulon LR is a standard bearing material and is used in sleeve, flange, thrust and linear bearing applications. Temperature range is -400 to 500F.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 10:05:04

ABS Round Rod, Natural Beige, 1/2" OD, 12" L

ABS Round Rod, Natural Beige, 1/2" OD, 12" L Reviews

Other Picture

ABS Round Rod, Natural Beige, 1/2" OD, 12" L Feature

• Good Chemical Resistance
• Hard Surface
• Easily Machined
• Good for Vacuum Forming
• Good Impact Resistance

General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene...to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295F (146C) - Rockwell Hardness R-105. Color: Natural (Beige). Other grades: flame retardant, high heat, low gloss, medium impact.

Visit Store Now !!

Detail Products

• HDPE (High Density Polyethylene) Round Rod, White, 1" OD, 12" Length
• High Impact Styrene Sheet, White, 0.04" Thick, 24" Width, 24" Length
• SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.028" Diameter, 72" Length (Pack of 1)
• Acetal Round Rod, Black, 1/4" OD, 24" Length
• ABS Textured Plastic Sheet 1/8" Thick x 12" x 24"

Detail Reviews

Feb 25, 2011 14:33:03

Polycarbonate Round Rod, Clear, 1/2" OD, 36" Length

Polycarbonate Round Rod, Clear, 1/2" OD, 36" Length Reviews

Other Picture

Polycarbonate Round Rod, Clear, 1/2" OD, 36" Length Feature

• High Impact Resistance
• Temperature Range of -60 to 270 F
• High Rigidity
• Ductility of Softer Lower Modulus Plastics
• Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

Visit Store Now !!

Detail Products

• Acrylic Round Rod, Clear, 1/2" OD, 24" Length
• Polycarbonate Sheet, Clear, 1/16" Thick, 12" Width, 24" Length
• Polycarbonate Tubing, 3/4" ID x 1" OD x 1/8" Wall, Clear Color 24" L
• Acetal Round Rod, Black, 1/4" OD, 24" Length
• Polypropylene Round Rod, Natural White, 1" OD, 48" Length

Detail Reviews

Feb 24, 2011 18:40:05

Teflon FEP Round Rod, White, 1" OD, 48" Length

Teflon FEP Round Rod, White, 1" OD, 48" Length Reviews

More Picture

Teflon FEP Round Rod, White, 1" OD, 48" Length Feature

• Temperature Range -348 to 400 F
• Extreme Chemical Resistance
• Lowest critical surface energy of all plastics
• Lowest Refractive Index of All Plastics
• Extremely low dielectric constant and dissipation factor

Teflon FEP Rod has excellent chemical, thermal, and electrical stability. It retains a high percentage of its useful properties from cryogenic to elevated temperatures -348 F to 400 F. It has the lowest critical surface energy of all plastics, which makes it an excellent water and oil repellent for non-stick and mold release. Teflon FEP has an extremely low dielectric constant and dissipation factor. Excellent resistance to UV, Ozone, and has the lowest refractive index of all plastics. Typical applications include electronic bobbins, piping material for high temperature use, spring actuated seals, gaskets, packing and valve seats.

Go tO Store Now !!

More Products

• PTFE Round Rod, White, 1-1/2" OD, 12" Length
• Teflon TFE Sheet, White, 1/16" Thick, 12" Width, 12" Length
• Acetal Round Rod, Black, 1/4" OD, 24" Length
• PTFE Sheet, White, 0.015" Thick, 12" Width, 12" Length
• Milwaukee 48-23-7200 1-1/2 by 2-3/16-Inch Chamfer Router Bit with 1/4-Inch Shank

More Reviews

Feb 23, 2011 22:42:04

Torlon 4203 Round Rod, Brown, 5/8" OD, 12" Length

Torlon 4203 Round Rod, Brown, 5/8" OD, 12" Length Reviews

More Picture

Torlon 4203 Round Rod, Brown, 5/8" OD, 12" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Go tO Store Now !!

More Products

More Reviews

Feb 23, 2011 03:23:03

PEEK Round Rod, Tan, 3/8" OD, 6" Length

PEEK Round Rod, Tan, 3/8" OD, 6" Length Reviews

More Picture

PEEK Round Rod, Tan, 3/8" OD, 6" Length Feature

• Glass transition temperature of approx. 500 F
• Superior Chemical Resistance
• Low moisture absorption, and excellent hydrolysis resistance
• Used extensively in medical applications, chemical processing and electronics industries
• Sterilizable By All Known Conventional Methods

Valued for its ability to withstand high temperatures, outstanding chemical resistance (organic, inorganic solvents, aqueous reagents), and good mechanical strength, PEEK (Polyetheretherketone) is a highly crystalline thermoplastic that maintains its properties under an extreme range of conditions. Used extensively in medical applications, chemical processing and electronics industries, this material offers good wear resistance, low moisture absorption, and excellent hydrolysis resistance. Repeated sterilization by all known methods has no effect on PEEK devices. Color: Putty

Go tO Store Now !!

More Products

• PTFE Round Rod, White, 1-1/2" OD, 12" Length
• PEEK 1000 Round Rod, Tan, 3/8" OD, 12" Length
• Stainless Steel 316 Hypodermic Round Tubing, 15 Gauge, 0.0720" OD, 0.054" ID, 0.009" Wall, 60" Length
• Dremel 4486 MultiPro Keyless Chuck

More Reviews

Feb 22, 2011 01:54:03

Torlon 4301 Round Rod, Black, 3/4" OD, 48" Length

Torlon 4301 Round Rod, Black, 3/4" OD, 48" Length Reviews

More Picture

Torlon 4301 Round Rod, Black, 3/4" OD, 48" Length Feature

• Temperature resistance from cryogenic to 500 F
• Melt Processable
• Excellent Chemical Resistance
• High Strength
• UL 94 Rated

Polyamide Imide (PAI) is a thermoplastic amorphous polymer that has exceptional mechanical, thermal, and chemical resistant properties. It is in the league of "Superpolymers" exhibiting temperature resistance from cryogenic to 500 F. This unique material combines properties from both polyamides and polyimides such as high strength, melt processability and it is inherently flame retardant. UL 94 ratings generally allow for FAA Aircraft Interiors due to very low smoke on ignition. Generally un affected by aliphatic and aromatic hydrocarbons, acids, bases and halogenated solvents. Applications include engine and generator components, hydraulic bushings and seals, and mechanical parts for electronics and business machines.

Go tO Store Now !!

More Products

More Reviews

Feb 21, 2011 06:10:07

Nylon Round Rod, White, 1" OD, 36" Length

Nylon Round Rod, White, 1" OD, 36" Length Reviews

More Picture

Nylon Round Rod, White, 1" OD, 36" Length Feature

• Heat Deflection Temperature Under Load is 200 F
• Resists Common Solvents, Esters, Ketones, Alkali's and Dilute Acid
• Tough and Impact Resistant
• Low Coefficient of Friction
• Easily Machined

Nylon 6/6 Rods and Sheet are typically used as material for insulators, shaft bearings and bushings, wear strips, hinges, gears, and general fixturing. Heat deflection temperature at 264 PSI: 200F (93C). Color: Natural.A tough general purpose plastic with outstanding resistance to organic chemicals, acids and alkalis, Nylon 6/6 wears well against other surfaces and has a low coefficient of friction. It is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications, (up to 10 percent ) which should be taken into account with its use.

Go tO Store Now !!

More Products

• Acetal Round Rod, Black, 3/4" OD, 36" Length
• PTFE Round Rod, White, 1-1/2" OD, 12" Length
• Acetal Round Rod, White, 2" OD, 12" Length
• Nylon Molybdenum Round Rod, 1/4" OD, 24" Length
• Nylon Sheet, White, 3/4" Thick, 6" Width, 12" Length

More Reviews

Feb 20, 2011 10:40:04

Acrylic Round Rod, Clear, 1/2" OD, 24" Length

Acrylic Round Rod, Clear, 1/2" OD, 24" Length Reviews

More Picture

Acrylic Round Rod, Clear, 1/2" OD, 24" Length Feature

• Ammonia and Detergent Resistant
• Cast Acrylic rivals glass in transparency (92 percent light transmission) and exhibits outstanding weatherability.
• Haze Free Longevity
• Shatter and Impact Resistant
• Lightweight

Cast Acrylic rivals glass in transparency (92 percent light transmission) and exhibits outstanding weatherability. The casting process produces profiles with superior optical properties compared to molded or extruded products. Physical properties are also superior with less process induced stress (resistance to cracking/crazing). Cast Acrylic is approximately 1/2 the weight of glass and fabricates similar to wood. Post machining polishing can produce crystal clear components.Applications include displays, models, electrical/electronic parts, special lighting applications and industrial fixturing.

Go tO Store Now !!

More Products

• Polycarbonate Round Rod, Clear, 1/4" OD, 36" Length
• Acrylic Sheet, Clear, 3/8" Thick, 12" Width, 24" Length
• Acetal Round Rod, Black, 3/4" OD, 36" Length
• 90293 Acrylic Rod 3/16" (20)
• Permatex 84101 PermaPoxy 5 Minute General Purpose Epoxy -- Crystal Clear

More Reviews

Feb 19, 2011 12:26:03